MetroPCS APN Settings 5G [MetroPCS APN Hack Unlimited Data]

Are you searching for a way to increase your MetroPCS internet speed? If yes, then you have come to the right article because today we are going to talk about the latest MetroPCS APN Settings 5G and how you can configure it for your mobile phone.

The latest MetroPCS APN settings 2024 provides your smartphone with a stable and smoother internet connection to give you the best possible net speed. So without wasting any time in the introduction, let’s get to the main APN metropcs 5G configurations.

About MetroPCS Telecom Company

T-Mobile owns Metro, an American prepaid cellphone service provider in the United States. It offers countrywide voice, text, and mobile internet/data services using T-infrastructure Mobile and a variety of speeds including HSPA, HSPA+, and 4G LTE networks.

After this short overview of MetroPCS company let’s start with how to set up the best 4G/5G APN setting for MetroPCS. So that you may connect to the internet and browse on your smartphone quickly.

What Is MetroPCS APN Settings 5G in 2024?

MetroPCS APN settings are a gateway that connects the smartphone to the internet through a carrier’s network. APN settings are important for mobile phones by providing a connection point between a cellular network and the internet. To access the internet you just have to open your device settings > mobile network settings > Access Point Name > click on Add New APN option.

MetroPCS APN Settings 2024 For Android

If you have an Android smartphone, accessing the settings will differ depending on the brand and version of Android you have.

In the below table, we have configured the best MetroPCS APN settings 2024, which will help you to get high internet speed on your smartphone. Before setting up this, make sure you have acquired a valid MetroPCS active data plan. Then only try to try to change MetroPCS APN and MMS Settings.

In general to change APN settings, go to “settings,” then “wireless networks,” or “network & internet,” then “mobile network,” and then “Access Point Names.”

Now from here, you can change your MetroPCS APN setting 2024. Before attempting to add a new MetroPCS 5G APN setting, you might to erase any existing settings.

MetroPCS APN DetailsMetroPCS 5G APN Settings 2024
APNfast.metropcs. com
ProxyLeave Empty
PortLeave Empty
UsernameLeave Blank
PasswordLeave Blank
ServerLeave Empty
MMS proxyLeave Empty
MMS portLeave Blank
MCCLeave Blank (Empty)
MNCNo Fill Requirement
Authentication TypeNo Fill Requirement
APN Typedefault,mms,supl
APN ProtocolIPv4/IPv6
APN Roaming ProtocolIPv4

To activate the MetroPCS APN Hack Settings, you must restart your smartphone.

If in case, You might also want to try resetting APNs to the defaults by going to the three-dot menu and selecting Reset APNs.

After you’ve configured the new MetroPCS APN, make sure to save them. After that, try rebooting or restarting your phone.

If you’ve done everything above and still can’t able to make calls, send texts, or use data, your phone is either not compatible with the Metro By T-Mobile network or you have a defective SIM card and should have to request a replacement from Metro By T-Mobile.

Important: Double-check your APN settings to ensure you haven’t mistakenly put a space or comma where none should be entered.

MetroPCS APN Settings For iPhone Devices

Because Apple frequently prohibits complete access to the settings unless you jailbreak and so to hack the phone, changing APN settings on the iPhone might be tough. We also do not recommend doing this on your iPhone.

Unless and un if you have access to the settings,

These are the steps from where you can successfully change Metro PCS APN settings and get high internet speed.

  • To begin, open Settings on your iOS device
  • Select Cellular Data Option and then Cellular Data Network. (Fill in the MetroPCS 5G APN Settings information as shown below.)
  • In the “LTE Setup (Optional)” area, fill in the following information.
  • In the MMS Section, enter the MetroPCS MMS Settings.
  • To make your APN Settings operational, choose the home option to save the updated APN Settings and then restart your iOS device.

It might be a touch to restore default settings or manually modify them. You may also look for the below table for APN MetroPCS settings 2024 for iPhone or iOS.

MetroPCS APN DetailsMetroPCS APN Settings 2024 For 4G/5G Speed
APNfast.metropcs. com
UsernameLeave Blank
PasswordLeave Blank
ServerLeave Blank
MMS proxyLeave Blank
MMS Max Message Size1048578

Save this APN setting for MetroPCS iPhone and restart your device for once.

Important: It is suggested that you erase any other non-working APN settings on your phone before switching to one of the APN settings for MetroPCS provided above.

Why My MetroPCS Internet Is Not Working?

If you’re having trouble connecting to data or the Internet on your Metro by T-Mobile device, there are a few things you can do to fix it: Examine the following settings on your phone to ensure they are correct:

  • Mobile data is turned on,
  • Wi-Fi is turned off,
  • Airplane mode is turned off, and
  • any mobile data constraints are turned off.

What Is The Best MetroPCS APN Settings 2024?

Above we have configured the best MetroPCS APN configuration for Android smartphones and iPhone users.

How Do I Add MetroPCS APN Hack To My Phone?

To add a new MetroPCS APN, go to mobile settings > click on Mobile Network > select Access Point Name option > click on + sign to add new APN MetroPCS.

Does MetroPCS use CDMA or GSM?

You may now use MetroPCS service with your unlocked GSM phone. This is because MetroPCS, which was formerly CDMA-only, is now accessing T-GSM Mobile’s network for the first time.

What Is The Network Operator For MetroPCS?

T-Mobile is the network operator for MetroPCS.

Are There Any Special MetroPCS Unlimited Hotspot APN Settings To Configure?

No, there is no other special MetroPCS Unlimited Hotspot APN Setting, Just configure the above-described MetroPCS 5G APN from the table.

How Do I Change From MetroPCS LTE to 5G?

To do MetroPCS LTE to 5G, we’ll go over the initial steps again, but this time compel the phone to utilize 5G.

  • Open “Settings”
  • Select “Cellular”
  • Select “Cellular Data Options”.
  • Select “Voice & Data”.
  • Change the setting to “5G On.”

Once you have completed this step, you may proceed to step forward to set up a MetroPCS APN.

What is MetroPCS APN Type in APN Settings?

Configuration of a MetroPCS Access Point Name (APN) for a carrier data connection. The MetroPCS APN allows a cellular network device to be connected to an IP data network.

Are you facing a slow internet problem while using MetroPCS internet on your device? If yes then here we have updated 5G MetroPCS APN settings that you can apply on your device to boost it. Here we will let you know the step-by-step method to configure & apply Metro PCS APN settings.

About MetroPCS Company

MetroPCS was the old name of this company and now it is known as Metro by T-Mobile. It is an American prepaid wireless service provider company that is now owned by T-Mobile. MetroPCS offers text, voice, and mobile internet services by using the T-Mobile network & infrastructure.

After this deep information about MetroPCS, now let’s jump to the main topic of how to set up 4G/5G internet settings for MetroPCS.

MetroPCS APN Settings 5G For Android

If you have an Android smartphone then you can change APN settings by navigating to the mobile settings, mobile network settings, and then the access point name to add a new APN. However, the MetroPCS APN can differ depending on the brand and model you have.

Below we have provided the best APN settings for MetroPCS by which you can get high-speed internet. But before setting up these MetroPCS APN internet settings you must check if your sim has an active data plan or not.

To change MetroPCS APN settings on Android navigate to settings > Wireless & internet > Mobile Network > Access Point Name.

From here, click on the add newton and fill in the MetroPCS 5G APN settings and press the save button.

MetroPCS APN DetailsMetroPCS 5G APN Settings 2024
APNfast.metropcs. com
MMS proxyBlank
MMS portBlank
Authentication TypeBlank
APN Typedefault,mms,supl
APN ProtocolIPv4/IPv6
APN Roaming ProtocolIPv4

After filling in these settings, you will have to restart your Androito in order to set up MetroPCS APN hack unlimited data.

If the APN settings for MetroPCS are not working on your device then you must have to use the T-Mobile APN settings. After the change of its parent company, it might be possible that the MetroPCS APN will not work with its network.

Even after using the other APN settings if you are unable to perform activities like calling and texting then you might have a damaged SIMm card. In this case, you should call one of the T-Mobile customer care services and talk about this problem.

MetroPCS APN Settings For iPhone

Apple always prohibits their users from changing their default settings unless they jailbreak the device settings. So changing APN settings for MetroPCS on iPhone can be tough and we never advise you to do this on your phone.
However, if you have access to your settings then here are the steps by which you can change MetroPCS APN settings on iPhone or IOS devices.

  • Open iPhone settings.
  • Select the cellular data option.
  • Open cellular data network.
  • Fill in the settings we have shown below here.
  • Also, fill in LTE options with the following details.
  • In the MetroPCS MMS section fill MetroPCS MMS settings.

In the end, just click on the home button and your MetroPCS internet setting will be saved automatically.

To make your MetroPCS 5G APN settings operational, now, just restart your iPhone and let settings set up automatically on your device. It might take a few seconds but when it gets done you will be able to use 5G MetroPCS internet on an iPhone.

MetroPCS APN DetailsMetroPCS APN Settings 2024 For 4G/5G Speed
APNfast.metropcs. com
MMS proxy<Blank>
Internet Tethering
MMS Max Message Size1048576

Save this MetroPCS APN configuration on your iPhone and restart it to start using 5G internet. Remember to erase any already existing or default MetroPCS APN before switching to another one.

Why My MetroPCS Internet Is Not Working?

If you are facing any trouble while using MetroPCS internet then there can be various reasons behind it. To fix these issues you can check the settings we have shown here:

  • Wi-Fi is turned off.
  • Mobile data is turned on.
  • Airplane mode is turned off.
  • Any VPN app turned off.

You have to check all these options and if you are still not able to use MetroPCS internet then you should change MetroPCS APN settings on your mobile.

What is the Best APN for MetroPCS?

The best MetroPCS 5G APN settings are name: MetroPCS & APN: fast.metropcs. Com. These settings are the best in order to get 4G/5G MetroPCS internet speed 

How Do I Add MetroPCS APN Hack To My Phone?

By navigating to mobile settings > mobile network & wireless > Access Point Name > Add new. Now, you can add a new MetroPCS APN settings hack to your device.

What Is MetroPCS Network Operator?

At the current time, T-Mobile is the network operator for MetroPCS.

Is There Any Metro APN Hack To Get Unlimited Data?

No, there is no MetroPCS APN hack to get unlimited data on your device. You only can boost MetroPCS internet by configuring APN settings.

What APN Type Should I Choose In MetroPCS 5G APN Settings 2024?

The APN type for MetroPCS is default,mms,supl. You have to fill in this detail when adding a new MetroPCS APN.

Below we have also mentioned some other companies APN setups which you can have a look at as well.

You can easily give a try to these internet settings on your device if you have a different sim network operator on your mobile.

Leave a Comment